55.6 Mirror Configuration Task List
1. Specify mirror destination port
2. Specify mirror source port(CPU)
3. Specify flow mirror source
1. Specify mirror destination port
Global mode
monitor se ssion < session> de stination
interface <interface-number>
no monitor se ssion < session> de stination
interface <interface-number>
2. Specify mirror source port (CPU)
Global mode
monitor se ssion < session> source
{interface <interface-li st> | cpu [slot
<slotnum> ]} {rx| tx| both}
no monitor se ssion < session> source
{interface <interface-li st> | cpu [slot
<slotnum> ]}
3. Specify flow mirror source
Global mode
monitor se ssion < session> source
{interface <interface-li st>} access-group
<num> {rx|tx|both}
no monitor se ssion < session> source
{interface <interface-li st>} access-group
<num>
Command
Command
Command
Specifies mirror destination port; the no
command deletes mirror destination source
port.
Explanation
Specifies mirror source port; the no command
deletes mirror source port.
Explanation
Specifies flow mirror s ourc e port and apply
rule; the no command deletes flow mirror
source port.
55-5
Explanation