Global Mode
servi ce dhcpv6
no servi ce dhcpv6
2. To enable DHCPv6 prefix delegation client function on port
Interface Configuration Mode
ipv6 dhcp client pd <prefix-nam e>
[rapid-commit]
no ipv6 dhcp client pd
29.6 DHCPv6 Configuration Examples
Example1:
When deploying IP v6 net working, XGS 3 series switches can be configured as DHCP v6 server in order to
manage the allocation of IP v6 addresses. Both the state and the stateless DHCP v6 are supported.
Topology:
The access layer use Switch1 switch to connect users of dormitory buildings; Switch2 is configured as
DHCP v6 relay delegation in primary aggregation layer; Switch3 is configured as DHCP v6 server in secondary
aggregation layer, and connected with backbone network or higher aggregation layers; The Windows Vista
which be provided with DHCP v6 client must load on P C.
Command
Command
Explanation
To enable DHCP v6 service.
Explanation
To enable client prefix delegation request
function on specified port, and the prefix
obtained associate with universal prefix
configured.
29-6