Planet XGS3-42000R User Manual page 325

neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
10． Configure the Local Preference Value
BGP configuration mode
bgp default local-preference <value>
no bgp default local-preference
11． Enable sending default route
BGP configuration mode
neighbor { <ip-address> | <TAG> }
default-originate
no neighbor { <ip-address> | <TAG> }
default-originate
12． Configure BGP's MED Value
（1）
Configure MED value
Rout e map configuration command
set metric <metri c-value>
no set metric
（2）
Apply route selection based on MED according to the path from different AS
BGP configuration mode
bgp always-compare-med
no bgp always-compare-med
13． Configure BGP routing redistribution
BGP configuration mode
redistribute { connected | static | rip |
ospf} [metric <metric>] [route-map
<NAME>]
Command
Command
Command
Command
Command
Configure the minimum int erval among
BGP routes update information; the no
neighbor {<ip-address>
advertisement-interval
recovers the default setting.
Explanation
Change default local preference; the no bgp
default local-preference
recovers the default value.
Permit sending default route 0.0.0.0;
the no neighbor { <ip-address> |
<TAG>
command cancels sending default
route.
Explanation
Configure metric value; the no set metric
command recovers the default value.
Explanation
Permit the MED comparison from different
AS; the no bgp always-compare-med
command forbids the comparison.
Explanation
Redistribute IGP routes to BGP and may
specify the redistributed metric and route
reflector; the no redistribute { connected |
39-12
| <TAG>}
command
command
Explanation
} default-originate