Planet XGS3-42000R User Manual page 171

|set-prec-transmit <ip_precedence_value>
|transmit) exceed-action
(drop|policed-dscp-transmit |transmit)|
violate-action (dro |policed-dscp-transmit|
transmit)} | )
no mls qos aggregate-policy
policy aggregate <aggregate-policy-nam e>
no policy aggregate
<aggregate-policy-name>
4. Apply QoS to port or VLAN interface
Interface Configuration Mode
mls qos trust [cos [pa ss-through-dscp]
[pass-through-cos]|dscp [pa ss-through-cos]
[pass-through-dscp]|ip-precedence
[pass-through-cos] [pa ss-through-dscp]|port
priority <cos> [pa ss-through-cos]
[pass-through-dscp]]
no mls qos trust
mls qos cos {<defaul t-cos>}
no mls qos cos
mls qos dscp-mutation
<dscp-mutation-name>
no mls qos dscp-mutation
<dscp-mutation-name>
servi ce-policy input <policy-map-name>
no servi ce-policy input <policy-map-name>
5. Configure queue out method and weight
Interface Configuration Mode
wrr-queue bandwidth <weight1 weight2
weight3 weight4 weight5 weight6 weight7
weight8>
no wrr-queue bandwidth
priority-queue out
no priority-queue out
Command
Command
Apply a policy set to classified traffic; the
"no policy
<aggregate-policy-name>" command
deletes the specified policy set.
Explanation
Configure port trust; the "no mls qos
trust" command disables the current
trust status of the port.
Configure the default CoS value of the
port; the "no mls qos cos" command
restores the default setting.
Apply a DSCP trans form mapping to the
specified port; the no command is the
default value
transform mapping.
Apply a policy map to the specified port
or VLAN interface; the no command
deletes the specified policy map applied
to the port or VLAN interface. Egress
policy map is not supported yet.
Explanation
Sets the WRR weight for specified egress
queue; the no command restores the
default setting.
Configure queue
method; the no command restores the
default WRR queue out method.
17-8
aggregate
of resume DS CP
out met hod to pq