Radius Configuration Task List - Planet XGS3-42000R User Manual

Length field (2 octets): The length of the overall RADIUS packet, including Code, Identifier, Length,
Authenticator and Attributes
Authenticator field (16 octets): used for validation of the packets received from the RADIUS server. Or it can
be used to carry encrypted passwords. This field falls into t wo kinds: the Request Authenticator and the
Response Authenticator.
Attribute field: used to carry detailed information about AAA. An Attribute value is formed by Type, Length, and
Value fields.

Ty pe field (1 octet), the type of the attribut e value, which is shown as below:
Property Ty pe of property
1
2
3 CHAP -Password
4 NAS-IP-Address
5
6
7 Framed-P rotocol
8 Framed-IP-A ddress
9 Framed-IP-Netmask
10 Framed-Routing
11
12
13 Framed-Compression
14
15
16
17
18
19 Callback-Number
20
21
22

Length field (1 octet), the lengt h in octets of the attribute including Type, Length and Value fields.

Value field, value of the attribute whose content and format is determined by the type and length of the
attribute.

52.2 RADIUS Configuration Task List

1． Enable the authentication and accounting function.
2． Configure the RA DIUS authentication key.
3． Configure the RA DIUS server.
4． Configure the parameter of the RADIUS servic e.
User-Name
User-Password
NAS-Port
Service-Type
Filter-Id
Framed-MTU
Login-IP-Host
Login-Servic e
Login-TCP-P ort
(unassigned)
Reply -Message
Callback-Id
(unassigned)
Framed-Route
Property Ty pe of property
23 Framed-IP X-Net work
24
25
26 Vendor-Specific
27 Session-Timeout
28 Idle-Timeout
29 Termination-Action
30 Called-Station-Id
31 Calling-Station-Id
32 NAS-Identifier
33 Proxy-State
34 Login-LAT-S ervice
35 Login-LAT-Node
36 Login-LAT-Group
37 Framed-A ppleTalk-Link
38 Framed-A ppleTalk-Network
39 Framed-A ppleTalk-Zone
40-59 (reserved for accounting)
60 CHAP -Challenge
61 NAS-Port-Type
62
63 Login-LAT-P ort
52-2
State
Class
Port-Limit