Table of Contents
Advertisement
44.3.3 ANYCAST RP v6 Configuration Examples
Multicast Server
The following is the configuration steps:
RP1 Configuration:
XGS 3-42000R#config
XGS 3-42000R(config)#interface loopback 1
XGS 3-42000R(config-if-Loopback1)#ipv6 address 2006::1/128
XGS 3-42000R(config-if-Loopback1)#exit
XGS 3-42000R(config)#ipv6 pim rp-candidate loopback1
XGS 3-42000R(config)#ipv6 pim bs r-candidate vlan 1
XGS 3-42000R(config)#ipv6 pim multicast-routing
XGS 3-42000R(config)#ipv6 pim anycast-rp
XGS 3-42000R(config)#ipv6 pim anycast-rp self-rp-address 2003::1
VLAN1:2000::100
DR
VLAN2:2001::1
RP1
receiver
The ANYCAST RP v6 function of a router
Figure 44-3-1
address
of
other-rp-address.
2 Multiple other-rp-addresses can be configured in
accordance with one anycast-rp-addr, Once the
register message from a DR is received, it should
be forwarded to all of this RP one by one.
No
operation
communicating with this router.
VLAN2:2001::2
VLAN1:2003::1
.........
RP2
receiver
44-15
the
register
message
will
cancel
other-rp-address
VLAN2:2004::2
VLAN1:2005::2
receiver
into
Advertisement
Table of Contents
Troubleshooting
