Planet XGS3-42000R User Manual page 97

5． Remote cluster net work management
1) Remote configuration management
2) Remotely upgrade member switch
3) Reboot member switch
6． Manage cluster network with web
1) Enable http
7． Manage cluster network with snmp
1) Enable snmp server
1. Enable or disable cluster
Global Mode
cluster run [key <WORD>] [vid <VID> ]
no cluster run
2. Create a cluster
Global Mode
cluster ip-pool <commander-ip>
no cluster ip-pool
cluster commander [<cluster_name>]
no cluster commander
cluster member {candidate-sn <candidate-sn>
| mac-address <m ac-addr> [id <member-id> ]}
no cluster member {id <member-id> |
mac-address <mac-addr>}
4. Configure attributes of the cluster in the commander switch
Global Mode
cluster auto-add
no cluster auto-add
cluster member auto-to-user
cluster keepalive interval <second>
no cluster keepalive interval
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Admin mode
clear cluster node s [node s-sn
<candidate-sn-list> | mac-addre ss
<mac-addr>]
Command
Command
Command
Explanation
Enable or disable cluster function in
the Chassis Switch.
Explanation
Configure the private IP address pool
for cluster member devices.
Create or delete a cluster.
Add or remove a member switch.
Explanation
Enable or disable adding newly
discovered candidate switch to the
cluster.
Change
members into manually added ones.
Set the keep-alive interval of the
cluster.
Set the max
keep-alive messages that can be
tolerated in the cluster.
Clear nodes in the list of candidat e
switches maintained by the switch.
6-2
automatically added
number of lost