Planet XGS3-42000R User Manual page 224

domain-name <domain>
no domain-name
netbios-name-server
[<address1>[<address2> [...<address8>
]]]
no netbios-name-server
netbios-node-type
{b-node|h-node |m-node|p-node|<type-n
umber>}
no netbios-node-type
bootfile <filename>
no bootfile
next-server
[<address1>[<address2> [...<address8>
]]]
no next-server
[<address1>[<address2> [...<address8>
]]]
option <code> {a scii < string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
lease { days [hours][minute s] | infinite }
no lease
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
(3) Configure manual DHCP address pool paramet ers
DHCP Address Pool Mode
hardware-address <hardware-address>
[{Ethernet | IEEE802|< type-number>}]
no hardware-address
host <address> [<mask> |
<prefix-length> ]
no host
client-identifier <unique-identifier>
no client-identifier
Command
Configure Domain name for DHCP clients;
the "no domain-name" command deletes
the domain name.
Configure the address for WINS server. The
no operation cancels the address for server.
Configure node type for DHCP clients. The
no operation cancels the node type for
DHCP clients.
Configure the file to be import ed for DHCP
clients on boot up. The no command
cancels this operation.
Configure the address of the server hosting
file for importing. The no command deletes
the address of the server hosting file for
importing.
Configure the network parameter specified
by the option code. The no command
deletes the network parameter specified by
the option code.
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the leas e period allocated
to addresses in the address pool.
Exclude the addresses in the address pool
that are not for dynamic allocation.
Explanation
Specify/delete the
when assigning address manually.
Specify/delete the IP address to be
assigned to the specified client when
binding address manually.
Specify/delete the unique ID of the user
when binding address manually.
28-3
hardware address