Planet XGS3-42000R User Manual page 504

4. Configure the parameter of the RADIUS servi ce
Global Mode
radius-se rver dead-time <minutes>
no radius-se rver dead-time
radius-se rver retransmit <retries>
no radius-se rver retransmit
radius-se rver timeout <seconds>
no radius-se rver timeout
radius-se rver accounting-interim-update
timeout <seconds>
no radius-se rver
accounting-interim-update timeout
5. Configure the IP address of the RADIUS NAS
Global Mode
radius na s-ipv4 <ip-address>
no radius na s-ipv4
radius na s-ipv6 <ipv6-address>
no radius na s-ipv6
Command
Command
Explanation
To configure the interval that the RADIUS
becomes available after it is down. The no
form of this command will restore the
default configuration.
To configure retry times for t he RADIUS
packets. The no form of this command
restores the default configuration.
To configure the timeout value for the
RADIUS server. The no form of this
command will
configuration.
To configure the
accounting. The no form of this command
will restore the default configuration.
Explanation
To configure the source IP address for the
RADIUS packets for the switch.
To configure the source IP v6 address for
the RADIUS packets for the switch.
52-4
restore the default
update interval for