Lldp Med Configuration - Planet IGS-5225 Series User Manual

• Management Address
: Click to refresh the page immediately.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

4.3.8.4 LLDP MED Configuration

This page allows you to configure the LLDP-MED. The LLDPMED Configuration screen in
The page includes the following fields:
Fast start repeat count
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for
instance hold the neighbor's IP address.
Figure 4-3-8-3: LLDPMED Configuration Page Screenshot
User's Manual of IGS-5225 series
239
Figure 4-3-8-3 appears.