Planet XGS3-42000R User Manual page 456

（11） Configuring a numbered extensive IPV6 access-li st
Global Mode
ipv6 access-li st <num-ext> {deny | permit} icmp
{{< sIPv6Prefix/sPrefixlen>} | any-source |
{host-source <sIPv6Addr>}}
{<dIPv6Prefix/dPrefixlen> | any-destination |
{host-de stination <dIPv6Addr>}} [<icmp-type>
[<icmp-code>]] [dscp <dscp>] [flow-label
<flowlabel>] [time-range <time-range-name>]
ipv6 access-li st <num-ext> {deny | permit} tcp
{{< sIPv6Prefix/<sPrefixlen>} | any-source |
{host-source <sIPv6Addr>}} [s-port { < sPort> | range
<sPortMin> < sPortMax> }] {{<
dIPv6Prefix/<dPrefixl en>} | any-destination |
{host-de stination <dIPv6Addr>}} [dPort { <dPort> |
range <sPortMin> <sPortMax> }] [syn | ack | urg | rst |
fin | psh] [dscp <dscp>] [flow-label <flowlabel>]
[time-range <time-range-nam e>]
ipv6 access-li st <num-ext> {deny | permit} udp
{{< sIPv6Prefix/<sPrefixlen>} | any-source |
{host-source <sIPv6Addr>}} [s-port { < sPort> | range
<sPortMin> < sPortMax> }]
{{<dIPv6Prefix/<dPrefi xlen>} | any-destination |
{host-de stination <dIPv6Addr>}} [dPort { <dPort> |
range <sPortMin> <sPortMax> }] [dscp <dscp> ]
[flow-label <flowlabel>] [time-range
<time-range-name> ]
ipv6 access-li st <num-ext> {deny | permit}
<next-header> {<sIPv6Prefix/sPrefixlen> |
any-source | {host-source < sIPv6Addr>}}
{<dIPv6Prefix/dPrefixlen> | any-destination |
{host-de stination <dIPv6Addr>}} [dscp <dscp>]
[flow-label <flowlabel>] [time-range
<time-range-name> ]
no ipv6 acce ss-li st <num>
（12）Configuring a standard IPV6 access-li st ba sed on nomenclature
a. Create a standard IPV6 access-li st based on nomenclature
Global Mode
Command
Command
46-12
Explanation
Creates a numbered
extended IPV 6 access-list, if
the access-list already exists,
then a rule will add to the
current access-list; the no
ipv6 acce ss-li st
command deletes
numbered standard
access-list.
Explanation
<num>
a
IPV6