Planet XGS3-42000R User Manual page 291

（2）Configure OSPF route introduction parameters
Configure the routes of the other protocols to introduce to OSPF.
OSPF Protocol Configuration Mode
redistribute { bgp | connected | static |
rip | kernel} [ metric-type { 1 | 2 } ] [ tag
<tag> ] [ metric <cost_value> ]
[router-map <WORD>]
no redistribute { bgp | connected |
static | rip | kernel }
（3）Configure OSPF importing the route s of other OSPF processe s
1）Enable the function of OSPF importing the routes of other OSPF processes
Rout er OSPF Mode
redistribute ospf [<process-id> ]
[metric<value> ] [metric-type
{1|2}][route-map<word>]
no redistribute ospf [<process-id> ]
[metric<value> ] [metric-type
{1|2}][route-map<word>]
2）Display relative information
Admin Mode or Configure Mode
show ip ospf [<process-i d>]
redistribute
3）Debug
Admin Mode
debug ospf redistribute message send
no debug ospf redistribute message
send
debug ospf redistribute route receive
no debug ospf redistribute route
receive
（4）Configure other OSPF protocol parameters
1）Configure how to calculate OSPF SPF algorithm time
2）Configure the LSA limit in the OSPF link state database
Command
Command
Command
Command
Explanation
Distribute other prot ocols to find routing and
static routings as external routing messages
the no redistribute {bgp | connected |
static | rip | kernel} command cancels the
distributed external messages.
Explanation
Enable or disable the function of OSPF
importing the routes
processes.
Explanation
Display the configuration information of the
OSPF process importing other outside
routes.
Explanation
Enable or disable debugging of sending
command from OSPF process redistributed
to other OSPF process routing.
Enable or disable debugging of received
routing message from NSM for OSPF
process.
37-6
of ot her OSPF