Table of Contents
Advertisement
vlan mac-address dynamic maximum
<value>
no vlan mac-address dynamic
maximum
Interface configuration mode
ip arp dynamic maximum <value>
no ip arp dynamic maximum
ipv6 nd dynamic maximum <value>
no ipv6 nd dynamic maximum
3． Configure the timeout value of querying dynamic MAC.
Global configuration mode
mac-address query timeout < seconds>
4． Display and debug the relative information of number limitation of MAC、IP on ports
Admin mode
show mac-address dynamic count {vlan
<vlan-id>|interface ethernet
<portName> }
show arp-dynamic count {vlan
<vlan-id> | interface ethernet
<portName> }
show nd-dynamic count {vlan
<vlan-id> | interface ethernet
<portName> }
debug switchport mac count
no debug switchport mac count
debug switchport arp count
no debug switchport arp count
debug switchport nd count
no debug switchport nd count
debug vlan mac count
no debug vlan mac count
debug ip arp count
no debug ip arp count
debug ipv6 nd count
no debug ipv6 nd count
Command
Command
Enable and disable the number limitation
function of MAC in the VLA N.
Enable and disable the number limitation
function of ARP in the VLA N.
Enable and disable the number limitation
function of NEIGHBOR in the VLAN.
Explanation
Configure the timeout value of querying
dynamic MAC.
Explanation
Display the number of dynamic MAC in
corresponding ports and VLAN.
Display the number of dynamic ARP in
corresponding ports and VLAN.
Display
the
NEIGHB OUR in corresponding ports and
VLAN.
All kinds of debug information when
limiting the number of MAC on ports.
All kinds of debug information when
limiting the number of ARP on ports.
All kinds of debug information when
limiting the number of NE IGHBOUR on
ports.
All kinds of debug information when
limiting the number of MAC in VLA N.
All kinds of debug information when
limiting the number of ARP in VLAN.
All kinds of debug information when
limiting the number of MAC in VLA N.
48-3
number
of
dynamic
Advertisement
Table of Contents
Troubleshooting
