Vrrp Configuration Task List - Planet XGS3-42000R User Manual

58.2 VRRP Configuration Task List

Configuration Task List:
1. Create/Remove the Virtual Router (required)
2. Configure VRRP dummy IP and interface (required)
3. Activate/ Deactivate Virtual Router (required)
4. Configure VRRP sub-parameters (optional)
（1）
Configure the preemptive mode for VRRP
（2）
Configure VRRP priority
（3）
Configure VRRP Timer intervals
（4）
Configure VRRP interface monitor
1. Create/Remove the Virtual Router
Global Mode
router vrrp <vrid>
no router vrrp <vrid>
2. Configure VRRP Dummy IP Address and Interface
VRRP protocol configuration mode
virtual-ip <ip>
no virtual-ip
interface {IFNAME | ethernet IFNAME |
Vlan <ID> }
no interface
3. Activate/Deactivate Virtual Router
VRRP protocol configuration mode
enable
disable
4. Configure VRRP Sub-parameters
(1) Configure the preemptive mode for VRRP
VRRP protocol configuration mode
preempt-mode {true| false}
Command
Command
Command
Command
Explanation
Creates/Removes the Virtual Rout er.
Explanation
Configures VRRP Dummy IP address; the
"no virtual-ip" command removes the
virtual IP address.
Configures VRRP
interface" command removes the interface.
Explanation
Activates the Virtual Router.
Deactivates the Virtual Rout er.
Explanation
Configures the preemptive mode for VRRP.
58-2
interface, the "no