Igmp Proxy Configuration Task List - Planet XGS3-42000R User Manual

The IGMP/MLD proxy works between the multicast router and the client, it works as both the multicast host
and router. Upstream and downstream ports should be specified in the IGMP/MLD proxy configuration. The
host protocol runs at upstream ports, while the router protocol runs at downstream ports. The s witch collects
the join and leave messages received from downstream ports and forward them to the multicast router
through upstream ports.
The IGMP proxy configuration is exclusive with P IM and DVMRP configuration.

43.11.2 IGMP Proxy Configuration Task List

1． Enable IGMP Proxy function
2． Enable configurations for bot h downstream and upstream ports for the IGMP Proxy in different
interfaces
3． Configure IGMP Proxy
1. Enable IGMP Proxy function
Global Mode
ip igmp proxy
no ip igmp proxy
2. Enable configurations for both downstream and upstream ports for the IGMP Proxy in different
interfaces
Interface Configuration Mode
ip igmp proxy upstream
no ip igmp proxy upstream
ip igmp proxy downstream
no ip igmp proxy downstream
3. Configure IGMP Proxy assi stant parameter
Global Mode
ip igmp proxy limit {group <1-500>| source
<1-500>}
no ip igmp proxy limit
ip igmp proxy unsolicited-report interval
<1-5>
no ip igmp proxy unsolicited-report
interval
ip igmp proxy unsolicited-report
Command
Command
Command
Explanation
Enable IGMP Proxy function. The "no ip
igmp proxy" disables this function.
Explanation
Enable IGMP Proxy upstream function. The "no ip
igmp proxy upstream" disables this function.
Enable IGMP Proxy downstream function. The "no
ip igmp proxy downstream" disables this
function.
Explanation
To configure the maximum number of groups
that upstream ports can join, and the
maximum number of sources in a single
group. The no form of this command will
restore the default value.
To configure how often the upstream ports
send out unsolicited report. The no form of
this command
configuration.
To configure the retry times of upstream ports'
43-53
will restore the default