Configuration Syntax; Shortcut Key Support - Planet XGS3-42000R User Manual


ACL Mode
ACL type
Standard IP ACL
Mode
Extended IP ACL
Mode

3.2.2 Configuration Syntax

Chasssis Switch provides various configuration commands. Although all the commands are different, they all
abide by the syntax for Chassis Switch configuration commands. The general commands format of Chassis
Switch is shown below:
cmdtxt <variable> {enum1 | ... | enumN } [option1 | ... | optionN]
Conventions: cmdtxt in bold font indicat es a command keyword; <variabl e> indicates a variable
parameter;{enum1 | ... | enumN } indicates a mandatory parameter that should be selected from the
parameter set enum1~enumN; and the square bracket ([ ]) in [option1 | ... | optionN] indicate an optional
parameter. There may be combinations of "< > ", "{ }" and "[ ]" in the c ommand line, such as [<variable>],
{enum1 <variable> | enum2}, [option1 [option2]], etc.
Here are examples for some actual configuration commands:
 show version, no parameters required. This is a command with only a keyword and no parameter, just
type in the command to run.
 vlan < vlan-id>, parameter values are required after the key word.
 firewall {enable | disable}, user can ent er firewall enable or firewall disable for this command.
 snmp-server community {ro | rw} <string>, the followings are possible:
snmp-server community ro <string>
snmp-server community rw <string>

3.2.3 Shortcut Key Support

Chassis Switch provides several shortcut keys to facilitate user configuration, such as up, down, left, right and
Blank Space. If the terminal does not recognize Up and Down keys, ctrl +p and ctrl +n can be used instead.
Key(s)
Back Space
Up "↑"
Down "↓"
Entry
Type ip access-li st
standard command under
Global Mode.
Type ip access-li st
extanded command under
Global Mode.
Function
Delet e a character before the cursor, and the cursor moves back.
Show previous command entered. Up to ten recently entered
commands can be shown.
Show next command entered. When use the Up key to get previously
entered commands, you can use the Down key to return to the next
command
Operates
Configure parameters
for Standard IP ACL
Mode.
Configure parameters
for Extended IP ACL
Mode.
3-36
Exit
Use the exit
command to return
to Global Mode.
Use the exit
command to return
to Global Mode.