Planet XGS3-42000R User Manual page 191

3. IPv6 Tunnel Configuration
(1) A dd/Delete tunnel
Command
Global mode
interface tunnel <tnl-id>
no interface tunnel <tnl-id>
(2) Configure tunnel description
Command
Tunnel Configuration Mode
description <desc>
no description <desc>
(3) Configure tunnel source
Command
Tunnel Configuration Mode
[tunnel soure { <ipv4-address> |
<interface-nam e> }
no tunnel soure { <ipv4-address> |
<interface-nam e> }
(4) Configure Tunnel Destination
Command
Tunnel Configuration Mode
tunnel destination <ipv4-addre ss>
no tunnel destination
<ipv4-addre ss>
(5) Configure Tunnel Next-Hop
Command
Tunnel Configuration Mode
tunnel nexthop <ipv4-address>
no tunnel nexthop <ipv4-address>
Explanation
Create a tunnel. The NO command deletes a
tunnel.
Explanation
Configure tunnel description. The NO command
deletes the tunnel description.
Explanation
Configure tunnel source end IP v4 address. The
NO command deletes the IP v4 address of tunnel
source end.
Explanation
Configure tunnel destination end IP v4 address.
The NO command deletes the IP v4 address of
tunnel destination end.
Explanation
Configure tunnel next-hop IP v4 address. The
NO command deletes the IP v4 address of tunnel
next-hop end.
21-9