Planet XGS3-42000R User Manual page 123

1. Creating a port group
Global Mode
port-group <port-group-number>
no port-group <port-group-number>
2. Add physical ports to the port group
Port Mode
port-group <port-group-number> mode
{active | passive | on}
no port-group
3. Enter port-channel configuration mode.
Global Mode
interface port-channel
<port-channel-number>
4. Set load-balance method for Port-group
Aggregation port configuration mode
load-balance {src-mac | dst-mac |
dst-src-mac | src-ip | dst-ip | dst-src-ip}
5. Set the system priority of LACP protocol
Global mode
lacp system-priority < system-priority>
no lacp system-priority
6. Set the port priority of the current port in LACP protocol
Port mode
lacp port-priority <port-priority>
no lacp port-priority
Command
Command
Command
Command
Command
Command
Explanation
Creates or deletes a port group.
Explanation
Adds ports to the port group and sets their
mode.
Explanation
Enters port-channel configuration mode.
Explanation
Set load-balance for port -group.
Explanation
Set the system priority of LA CP prot ocol,
the no command restores the default value.
Explanation
Set the port priority in LACP protocol. The
no command restores the default value.
12-4