Planet XGS3-42000R User Manual page 80

4-slot layer 3 ipv6/ ipv4 routing chassis switch
Table of Contents

Advertisement

The IP address of the NMS is 1.1.1.5; the IP address of the Chassis XGS3-42000R(Agent) is 1.1.1.9.
Scenario 1: The NMS network administrative software uses SNMP protocol to obtain data from the Chassis
Switch.
The configuration on the Chassis Switch is listed below:
XGS 3-42000R(config)#snmp-server enable
XGS 3-42000R(config)#snmp-server community rw privat e
XGS 3-42000R(config)#snmp-server community ro public
XGS 3-42000R(config)#snmp-server securityip 1.1.1.5
The NMS can use private as the community string to access the Chassis Switch with read-write permission,
or use public as the community string to access the Chassis Switch with read-only permission.
Scenario 2: NMS will receive Trap messages from the Chassis XGS3-42000R(Note: NMS may have
community string verification for the Trap messages. In this scenario, the NMS uses a Trap verification
community string of usertrap).
The configuration on the Chassis Switch is listed below:
XGS 3-42000R(config)#snmp-server enable
XGS 3-42000R(config)#snmp-server host 1.1.1.5 v1 usertrap
XGS 3-42000R(config)#snmp-server enable traps
Scenario 3: NMS uses SNMP v3 to obtain information from the Chassis Switch.
The configuration on the Chassis Switch is listed below:
XGS 3-42000R(config)#snmp-server
XGS 3-42000R(config)#snmp-server user tester UserGroup authPriv auth md5 hellotst
XGS 3-42000R(config)#snmp-server group UserGroup A uthPriv read max write max
notify max
XGS 3-42000R(config)#snmp-server view max 1 include
Scenario 4: NMS wants to receive the v3Trap messages sent by the Chassis Switch.
The configuration on the Chasssis Switch is listed below:
XGS 3-42000R(config)#snmp-server enable
XGS 3-42000R(config)#snmp-server host 10.1. 1.2 v3 authpriv tester
XGS 3-42000R(config)#snmp-server enable traps
Scenario 5: The IP v6 address of the NMS is 2004:1: 2:3::2; the IP v6 address of the Chassis
XGS 3-42000R(A gent ) is 2004: 1:2:3::1. The NMS net work administrative software uses SNMP protocol to
obtain data from the Chassis Switch.
The configuration on the Chassis Switch is listed below:
XGS 3-42000R(config)#snmp-server enable
4-12

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents