Planet XGS3-42000R User Manual page 321

BGP configuration mode
neighbor {<ip-address> | <TAG>}
send-community
no neighbor {<ip-address> | <TAG>}
send-community
4．Configure BGP Confederation
BGP configuration mode
bgp confederation identifier <as-id>
no bgp confederation identifier <as-id>
bgp confederation peers <as-id> [<as-id>..]
no bgp confederation peers <as-id> [<as-id>..]
5．Configure a Route Reflector
（1）
The following commands can be used to configure route reflector and its clients.
BGP configuration mode
neighbor <ip-address> route-reflector-client
no neighbor <ip-address> route-reflector-client
（2）
If there are more than one route reflectors in the cluster, the following commands can
configure cluster-id
BGP configuration mode
bgp cluster-id <cluster-id>
no bgp cluster-id
Command
Command
Command
Allow the
community attributes sending to
BGP neighbors; the no neighbor
{<ip-address>
send-community
enables
community attributes.
Configure
confederation identifier;
no
identifier
deletes
confederation identifier.
Configure the AS affiliated to the
AS confederation; the no bgp
confederation peers <as-id>
[<as-id>..]command
the
confederation.
Configure the current switch as
route reflector and specify a
client.
<ip-address>
route-reflector-client
commands
client.
Explanation
Configure cluster id; format "no" of the no
bgp cluster-id
cluster id configuration.
39-8
routing updates wit h
| <TAG>}
command
the route without
Explanation
a BGP
bgp confederation
<as-id> command
the BGP
deletes
AS from the
Explanation
the no neighbor
format deletes
command cancels
AS
the
AS
AS
a
the