Planet XGS3-42000R User Manual page 193

4． Configure IP v4 address 192. 168. 2.2 255.255.255.0 in VLAN2 of Switch2, and configure IP v4
address 192. 168. 3.1 255.255.255.0 in VLAN3.
5． The IP v4 address of P C1 is 192.168.1.100 255.255.255.0, and the IP v4 address of P C2 is
192.168.3.100 255.255.255.0.
6． Configure static routing 192.168.3.0/24 on S witch1, and configure static routing 192.168.1. 0/24 on
Switch2.
7． Ping each ot her among PCs.
First make sure PC1 and Switch can access each other by ping, and PC2 and
Switch2 can access each other by ping.
The configuration procedure is a s follow s:
Switch1(config)#interface vlan 1
Switch1(Config-if-Vlan1)#ip address 192.168.1.1 255.255.255.0
Switch1(config)#interface vlan 2
Switch1(Config-if-Vlan2)#ip address 192.168.2.1 255.255.255.0
Switch1(Config-if-Vlan2)#exit
Switch1(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2
Switch2(config)#interface vlan 2
Switch2(Config-if-Vlan2)#ip address 192.168.2.2 255.255.2550
Switch2(config)#interface vlan 3
Switch2(Config-if-Vlan3)#ip address 192.168.3.1 255.255.255.0
Switch2(Config-if-Vlan3)#exit
Switch2(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1
21-11