Planet XGS3-42000R User Manual page 88

tftp-server retransmi ssion-number
<number>
4.5.3.3 FTP/TFTP Configuration Examples
It is the same configuration Chassis Switch for IP v4 addresses and IP v6 addresses. The example only for the
IP v4 addresses configuration.
Scenario 1: The Chassis Switch is used as FTP/TFTP client. The Chassis Switch connects from one of its
ports to a computer, which is a FTP/ TFTP server with an IP address of 10.1.1.1; the Chassis Switch acts as a
FTP/ TFTP client, the IP address of the Chassis Switch management VLAN is 10.1.1.2. Download "nos.img"
file in the computer to the Chassis Switch.
 FTP Configuration
Computer side configuration:
Start the FTP server software on the computer and set the username "S witch", and the password "switch".
Place the "12_30_nos.img" file to the appropriate FTP server directory on the computer.
The configuration procedures of the switch are listed below:
XGS 3-42000R(config)#interface vlan 1
XGS 3-42000R(config-if-Vlan1)#ip address 10.1.1.2 255.255.255.0
XGS 3-42000R(config-if-Vlan1)#no shut
XGS 3-42000R(config-if-Vlan1)#exit
XGS 3-42000R(config)#exit
XGS 3-42000R#copy ftp: //Switch:switch@10.1.1.1/12_30_nos.img nos.img
With the above commands, the Chassis Switch will have the "nos.img" file in the computer downloaded to the
FLASH.
 TFTP Configuration
Computer side configuration:
Start TFTP server software on the computer and place the "nos.img" file to the appropriate TFTP server
directory on the computer.
Set the retransmission time for TFTP server.
Figure 4-5-2 Download nos.img file as FTP/TFTP client
10.1.1.2
10.1.1.1
4-20