Chapter 4 Basic Chassis Switch Configuration; Basic Configuration; Telnet Management; Telnet - Planet XGS3-42000R User Manual

4.1 Basic Configuration

Basic Chassis Switch configuration includes commands for entering and exiting the admin mode, commands
for entering and exiting interface mode, for configuring and displaying the Chassis Switch clock, for displaying
the version information of the Chassis Switch system, etc.
Command
Normal User Mode/ Admin Mode
enable
disable
Admin Mode
config [terminal]
Various Modes
exit
Except User Mode/ Admin Mode
end
Admin Mode
clock set <HH:MM:SS>
[YYYY.MM.DD]
show version
set default
write
reload

4.2 Telnet Management

4.2.1 Telnet

4.2.1.1 Introduction to Telnet
Telnet is a simple remote terminal protocol for remot e login. Using Telnet, the user can login to a remote host
with its IP address of hostname from his own workstation. Telnet can send the user's keystrokes to the remote
host and send the remote host output to the user's screen through TCP connection. This is a transparent
service, as to the user, the keyboard and monitor seems to be connected to the remote host directly.
Telnet employs the Client-Server mode, the local system is the Telnet client and the remote host is the Telnet
server. Chassis Switch can be either the Telnet Server or the Telnet client.
Chapter 4 Basic Chassis Switch
Explanation
The User uses enable command to step into admin
mode from normal user mode. The di sable command
is for exiting admin mode.
Enter global mode from admin mode.
Exit current mode and enter previous mode, such as
using this command in global mode to go back to
admin mode, and back to normal user mode from
admin mode.
Quit current mode and return to Admin mode when not
at User Mode/ Admin Mode.
Set system date and time.
Display version information of the Chassis Switch.
Restore to the factory default.
Save current configuration paramet ers to Flash
Memory.
Hot reset the Chassis Switch.
4-1
Configuration