Planet XGS3-42000R User Manual page 397

（1）Configure IGMP group parameters
1) Configure IGMP group filtering conditions
2) Configure IGMP to join in group
3) Configure IGMP to join in static group
Interface Configuration Mode
ip igmp access-group {<acl _num |
acl_name>}
no ip igmp access-group
ip igmp join-group <A.B.C.D >
no ip igmp join-group <A.B.C.D >
ip igmp static-group <A.B.C.D >
no ip igmp static-group <A.B.C.D>
（2）Configure IGMP Query parameters
1) Configure interval for IGMP to send query messages
2) Configure the maximum response time of IGMP query
3) Configure the time-out of IGMP query
Interface Configuration Mode
ip igmp query-interval <time_val>
no ip igmp query-interval
ip igmp query-max-response-time
<time_val>
no ip igmp
query-max-response -time
ip igmp query-timeout <time_val>
no ip igmp query-timeout
（3）Config IGMP version
Global Mode
ip igmp version <version>
no ip igmp version
3. Di sable IGMP Protocol
Interface Configuration Mode
Command
Command
Command
Command
Explanation
Configure the filtering conditions of the interface
to IGMP group; the "no ip igmp acce ss-group"
command cancels the filtering condition.
Configure the interface to join in some IGMP
group, the "no ip igmp join-group <A.B.C.D >"
command cancels the join.
Configure the interface to join in some IGMP
static group; the "no ip igmp static-group
<A.B.C.D >" command cancels the join.
Explanation
Configure the interval of IGMP query messages
sent periodically;
query-interval" command
value.
Configure the maximum response time of the
interface for IGMP query; the "no ip igmp
query-max-response -time" command restores
default value.
Configure the time-out of the interface for IGMP
query; the "no ip
command restores default value.
Explanation
Configure IGMP version on the interface; the "no
ip igmp version" command restores the default
value.
Explanation
43-45
the "no ip igmp
restores default
igmp query-timeout"