Chapter 8 Commands for LLDP
8.1 clear lldp remote-table
Command:
clear lldp remote-table
Function:
Clear the Remote-table on the port.
Default:
Do not clear the entries.
Command Mode:
Port Configuration Mode.
Usage Guide:
Clear the Remote table entries on this port.
Example:
Clear the Remote table entries on this port.
Switch(Config-Ethernet 1/0/1)# clear lldp remote-table
8.2 debug lldp
Command:
debug lldp
no debug lldp
Function:
Enable the debug information of LLDP function, the no operation of this command will disable the
debug information of LLDP function.
Default:
Disable the debug information of LLDP function.
Command Mode:
Admin Mode.
Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other
information.
Function
8-1