Table of Contents
Advertisement
XGS 3 Chassis Switch Ethernet P orts can works in three kinds of modes: Access, Hybrid and Trunk, each
mode has a different processing method in forwarding the packets with tagged or untagged.
The ports of Access type only belongs to one VLA N, usually they are used t o connect the ports of the
computer.
The ports of Trunk type allow multi-VLA Ns to pass, can receive and send the packets of multi-V LANs. Usually
they are used to connect between the switches.
The ports of Hybrid type allow multi-VLA Ns to pass, can receive and send the packets of multi-VLA Ns. They
can be used to connect between the switches, or to a computer of the user.
Hybrid ports and Trunk ports receive the data with the same process method, but
different method: Hybrid ports can send the packets of multi-VLANs without the VLAN tag, while Trunk ports
send the packets of multi-VLANs wit h the VLAN tag except the port native VLAN.
The Chassis Switch implements VLAN and GV RP (GA RP VLAN Registration Prot ocol) which are defined by
802.1Q. The chapter will ex plain the use and the configuration of VLAN and GVRP in detail.
14.1.2 VLAN Configuration Task List
1.
Creat e or delete VLA N
2.
Set or delete VLA N name
3.
Assign Switch ports for VLA N
4.
Set the switch port type
5.
Set Trunk port
6.
Set Access port
7.
Set Hybrid port
8.
Enable/Disable VLA N ingress rules on ports
9.
Configure Privat e VLAN
10. Set Private V LAN association
1. Create or delete VLAN
Global Mode
vlan WORD
no vlan WORD
2. Set or delete VLAN name
Global Mode
name <vlan-name>
no name
3. Assigning Switch ports for VLAN
VLAN Mode
Command
Command
Command
Explanation
Create/delete VLAN or enter VLA N Mode
Explanation
Set or delete VLAN name.
Explanation
14-2
send the data with
Advertisement
Table of Contents
Troubleshooting
