Planet XGS3-42000R User Manual page 78

{<ipv6-num -std>|<ipv6-name>}] [read
<read-view-nam e>] [write
<write-view-nam e>]
no snmp-server communi ty < string>
[acce ss {<num-std> |<name>}]
[ipv6-acce ss
{<ipv6-num -std>|<ipv6-name>}]
3. Configure IP address of SNMP management base
Command
Global Mode
snmp-server securityip { <ipv4-addr> |
<ipv6-addr> }
no snmp-se rver securityip { <ipv4-addr> |
<ipv6-addr> }
snmp-server securi tyip enable
snmp-server securi tyip di sable
4. Configure engine ID
Command
Global Mode
snmp-server engineid <engine-string>
no snmp-server engineid
5. Configure user
Global Mode
snmp-server user <use-string> <group-string>
[{authPriv | authNoPriv} auth {md5 | sha}
<word>] [acce ss {<num-std>|<name>}]
[ipv6-acce ss {<ipv6-num -std>|<ipv6-name>}]
no snmp-server user <user-string> [acce ss
{<num-std>|<nam e>}] [ipv6-acce ss
{<ipv6-num -std>|<ipv6-name>}]
Command
Explanation
Configure the secure IP v4/ IP v6 address which is
allowed t o access the switch on the NMS; the no
command delet es configured secure address.
Enable or disable secure IP address check function
on the NMS.
Explanation
Configure the local engine ID on the Chassis Switch.
This command is used for SNMP v3.
Explanation
Add a user to a SNMP group. This command is
used to configure USM for SNMP v3.
4-10