Planet XGS3-42000R User Manual page 548

1. Create ULPP group globally
Global mode
ulpp group <integer>
no ulpp group <integer>
2. Configure ULPP group
ULPP group configuration mode
preemption mode
no preemption mode
preemption delay <integer>
no preemption delay
control -vlan <integer>
no control-vlan
protect vlan-reference-instance
<instance-li st>
no protect vlan-reference-instance
<instance-li st>
flush enable mac
flush di sable mac
flush enable arp
flush di sable arp
description < string>
no description
Port mode
ulpp control vlan <vlan-li st>
no ulpp control vlan <vlan-li st>
ulpp flush enable mac
ulpp flush di sable mac
ulpp flush enable arp
ulpp flush di sable arp
ulpp group <integer> master
no ulpp group <integer> master
ulpp group <integer> slave
no ulpp group <integer> slave
Command
Command
Configure and delete ULPP group
globally.
Configure the preemption mode of
ULPP group.
deletes the preemption mode.
Configure the preemption delay, the
no operation restores the default
value 30s.
Configure the sending control VLA N,
no operation restores the default
value 1.
Configure the protection VLA Ns, the
no operation deletes the protection
VLANs.
Enable or disable sending the flus h
packets which update MAC address.
Enable or disable sending the flus h
packets which delete A RP.
Configure or delete ULPP group
description.
Configure
VLANs, no operation restores the
default value 1.
Enable or disable receiving the flus h
packets which update the MA C
address.
Enable or disable receiving the flus h
packets which delete A RP.
Configure or delete the master port
of ULPP group.
Configure or delet e the slave port of
ULPP group.
61-3
Expalnation
Explanation
The no operation
the receiving control