Examples Of Cluster Administration - Planet XGS3-42000R User Manual

8. Manage cluster network with snmp
Global Mode
snmp-server enable

6.3 Examples of Cluster Administration

Scenario:
The four switches SW1-SW4, amongst the SW1 is the command switch and ot her switches are member
switch. The SW2 and SW4 is directly connected with the command switch, SW3 connects to the command
switch through SW2.
E1
SW1
Configuration Procedure
1. Configure the command switch
Configuration of SW1:
XGS 3-42000R(config)#cluster run
XGS 3-42000R(config)#cluster ip-pool 10.2.3. 4
XGS 3-42000R(config)#cluster commander 5526
XGS 3-42000R(config)#cluster aut o-add
2. Configure the member switch
Configuration of SW2-SW4
XGS 3-42000R(config)#cluster run
Command
E2 E1
SW2
Figure 6-3-1 Examples of Cluster
Enable snmp server
commander
switch.
Notice: must insure the snmp server
function be enabled in member
switch when
visiting member switch by snmp. The
commander s witch
switch via configure character string
<commander-community>@sw<me
mber id>.
E2
SW3
6-4
Explanation
function in
switch and member
commander s witch
visit member
E1 E1
SW4