Planet XGS3-42000R User Manual page 503

5． Configure the IP address of the RADIUS NAS.
1. Enable the authentication and accounting function.
Global Mode
aaa enable
no aaa enable
aaa-accounting enable
no aaa-accounting enable
aaa-accounting update {enable|disable}
2. Configure the RADIUS authentication key.
Global Mode
radius-se rver key <string>
no radius-se rver key
3. Configure the RADIUS server.
Global Mode
radius-se rver authentication host
{ <IPaddress> | <IPv6address> } [[port
{<portNum>}] [key <string>] [primary]
[acce ss-mode {dot1x|telnet}]
no radius-se rver authentication host
<IPaddress>
radius-se rver accounting host
{ <IPaddress> | <IPv6address> } [[port
{<portNum>}] [primary]]
no radius-se rver accounting host
<IPaddress>
Command
Command
Command
Explanation
To enable the AAA authentication function.
The no form of this command will disable
the AAA authentication function.
To enable AAA accounting. The no form of
this command will disable AAA accounting.
Enable or disable the update accounting
function.
Explanation
To configure the encryption key for the
RADIUS server. The no form of this
command will remove the configured key.
Explanation
Specifies the IP address and listening port
number, cipher key, whether be primary
server or not and access mode for the
RADIUS server; the no command deletes
the RADIUS authentication server.
To configure the IP/IP v6 address and the
port number for the accounting RADIUS
server. The no form of this command will
remove the RA DIUS server configuration.
52-3