Planet XGS3-42000R User Manual page 190

(9) Delet e all entries in IP v6 neighbor table
Command
Admin Mode
clear ipv6 neighbors
(10) Set the hoplimit of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd ra-hoplimit <value>
(11) Set the mtu of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd ra-mtu <value>
(12) Set the reachable-time of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd reachable-time <seconds>
(13) Set the retrans-timer of sending router advertisement
Command
Interface Configuration Mode
ipv6 nd retrans-timer <seconds>
(14) Set the flag representing whether information other than the address information will be obtained via
DHCP v6.
Command
Interface Configuration Mode
ipv6 nd other-config-flag
(15) Set the flag representing whether the address information will be obtained via DHCP v6
Command
Interface Configuration Mode
ipv6 nd managed-config-flag
Explanation
Clear all static neighbor table entries.
Explanation
Set the hoplimit of sending router advertisement.
Explanation
Set the mtu of sending rout er advertisement.
Explanation
Set the reachable-time
advertisement.
Explanation
Set the retrans-timer
advertisement.
Explanation
Set the flag representing whether information
other than the address information will be
obtained via DHCP v6.
Explanation
Set the flag representing whether the address
information will be obtained via DHCP v6.
21-8
of sending router
of sending router