66.7.2 System Log Configuration
System Log Configuration Task Sequence:
1. Display and clear log buffer zone
2. Configure the log host output channel
1.
Di splay and clear log buffer zone
Admin Mode
show logging buffered [ level {critical |
warnings} | range <begin-index> <end-index>]
clear logging {sdram | nvram}
2.
Configure the log host output channel
Global Mode
logging {<ipv4-addr> | <ipv6-addr>} [ facility
<local-number> ] [level <severity>]
no logging {<ipv4-addr> | <ipv6-addr>} [ facility
<local-number>]
Command
Command
Show detailed log information in
the log buffer channel.
Clear log buffer zone information.
Enable the output channel of the
log host. The "no" form of this
command will disable the output at
the output channel of the log host.
66-5
Description
Description