Vrrpv3 Configuration; Configuration Task Sequence - Planet XGS3-42000R User Manual

59.2 VRRPv3 Configuration

59.2.1 Configuration Task Sequence

1. Create/delete the virtual router (necessary )
2. Configure the virtual IP v6 address and interface of VRRP v3 (nec essary)
3. Enable/disable the virtual router (necessary)
4. Configure VRRP v3 assistant parameters (optional)
(1) Configure VRRP v3 preempt mode
(2) Configure VRRP v3 priority
(3) Configure the VRRP v3 advertisement interval
(4) Configure the monitor int erface of VRRP v3
1. Create/delete the virtual router
Global Configuration Mode
router ipv6 vrrp <vrid>
no router ipv6 vrrp <vrid>
2. Configure the virtual IPv6 address and interface of VRRP v3
VRRP v3 Protocol Mode
virtual-ipv6 <ipv6-address> Interface
{Vlan <ID> | IFNAME }
no virtual-ipv6 interface
3. Enable/disable the virtual router
VRRP v3 Protocol Mode
enable
disable
4. Configure VRRPv3 a ssi stant parameters
(1 ) Configure VRRP v3 preempt mode
VRRP v3 Protocol Mode
preempt-mode {true| false}
( 2 ) Configure VRRP v3 priority
VRRP v3 Protocol Mode
priority < priority >
Command
Command
Command
Command
Command
Explanation
Create/delete the virtual router.
Explanation
Configure the virtual IP v6 address and
interface of VRRP v3, the no operation of this
command will delete
address and interface.
Explanation
Enable the virtual router.
Disable the virtual router.
Explanation
Configure VRRP v3 preempt mode.
Explanation
Configure VRRP v3 priority.
59-4
the virtual IP v6