Figure 1.75 [Snmp Trap] Window; Table 1.104 Setting And Display Items In The [Snmp Trap] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

TABLE 1.104 Setting and display items in the [SNMP Trap] window

Items
Community/User
Sets the SNMP community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
IP Address
Sets the IPv4 or IPv6 IP address of the trap destination.
SNMP Version
Sets the SNMP version. (1, 2, 3)
Auth
Sets the security level.
You can specify this only if [3] is selected in [SNMP Version].
With [1] or [2] selected for [SNMP Version], this item is grayed out and disabled. In
this case, the available security level will be only noauth.
Auth Type
Sets the hash function to encrypt passwords.


This item takes effect only if [3] is selected for [SNMP Version]. With [1] or [2]
selected for [SNMP Version], this item is grayed out and disabled.
Auth passphrase
Sets a passphrase for authentication.
This item takes effect only if [3] is selected for [SNMP Version] and [auth] or [priv] is
selected for [Auth].
Priv passphrase
Sets a passphrase for encryption.
This item takes effect only if [3] is selected for [SNMP Version] and [priv] is selected

FIGURE 1.75 [SNMP Trap] window


noauth: Do not use the authentication function.

auth: Use the authentication function.

priv: Use the authentication function and "privacy" function (data encryption).
MD5
SHA
Description