Figure 6.8 Example Of [Snmp Trap] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 6 Work after installation
6.5 Set up of security
Set up transmission destination of SNMP trap
Operations
1. Click [Network Configuration] - [SNMP Configuration] - [Trap].
→ [SNMP Trap] window is displayed. See "["■ [SNMP Trap window] window" of 1.5.6 [SNMP Configuration] Menu"
of PRIMEQUEST 2000 series Tool Reference (CA92344-0539) for the details of [SNMP Trap] window.
2. Enter the transmission destination.
A maximum of 16 Trap destinations can be set up.
The details regarding community or user name, IP address of trap transmission destination, SNMP version, and
authentication level are set up.
3. Click [Apply] button.
When [Test Trap] button is clicked, trap for test for currently set up trap destination can be transmitted.

FIGURE 6.8 Example of [SNMP Trap] Window

112
CA92344-0536-04