Displaying The Device Manager; Starting The Hba Setup Utility; Procedure For Setting Uefi Driver Version 5.01A13 Or Later On The Converged Network Adapter - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

3.2 Procedure for Setting UEFI Driver Version 5.01A13 or
Later on the Converged Network Adapter
This section describes the procedure for setting UEFI driver version 5.01A13 or later.

3.2.1 Displaying the Device Manager

1. Select [Device Manager], and then press the [Enter] key.
FIGURE 3.1
2. The [Device Manager] screen appears.

3.2.2 Starting the HBA setup utility

1. Select [Emulex Configuration Utility Ver: x.xxxx] from the [Device Manager] screen, and then press the
[Enter] key.
Boot Manager front page
84