CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
3.3.7 Set up of telnet
MMB telnet is set up.
See
"3.6 Storage of the configuration
The following condition must be satisfied in advance when field engineers perform the Maintenance tasks on this product.
-
Video Redirection and Virtual Media are available.
For details on how to setup the procedure, see Chapter 1.3.3 [Console Redirection Setup] window in the
PRIMEQUEST 2000 Series Tool Reference (CA92344-0539).
-
SSH or Telnet is available.
For details on how to setup the procedure, see Chapter 1.5.4 [Network Protocols] window in the PRIMEQUEST 2000
Series Tool Reference (CA92344-0539).
Note
To set up telnet, log in to Administrator privileges.
Operations
1.
Click [Network Configuration]-[Network Protocols].
→ [Network Protocols] window is displayed. For details on [Network Protocols] window, see "1.5.4[Network
Protocols] Window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
2.
Items of [Telnet] are set.
Note
MMB uses the following fixed port number of TCP/IP. Do not change the following port numbers.
-
623/udp: For RMCP communication
-
664/udp: For RMCP communication
3.
Click [Apply] button.
information" for the backup of set up information.
FIGURE 3.7
Example of [Network Protocols] Window
21
CA92344-0536-04