Window Display Error Messages - Fujitsu PRIMEQUEST 2000 Series Message Reference

MMB Messages
2.4

Window Display Error Messages

This section lists the error messages displayed during Web-UI operations and contains information on how
to
respond to them.
Note
A message with a message ID may have a numerical value at the end of the message. (Example. 00:0404)
This numerical value indicates the detailed information. If the problem cannot be resolved, contact your sales
representative or a field engineer and pass on the numerical value.
GUI messages and corrective actions are as follows.
I_00001
Command Completed
Meaning:
The e-mail send test was successful.
Corrective action:
No action is necessary.
Severity:
Info
E_00002
Command Failed
Meaning:
Acquisition of the setting information has failed.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Severity:
Error
I_00004
Not Logged in.
Meaning:
There is no session. (The session was disconnected due to time-out, since there was no Web-UI operation.)
Corrective action:
Log in again.
Severity:
Info
E_00012
One or more errors occurred while setting.
Meaning:
Error has occurred while setting.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Severity:
Error
I_00013
Setting completed.
Meaning:
Setting was successful.
Corrective action:
No action is necessary.
Severity:
Info
C122-E178-02EN
140