Table 6.4 Messages In The State Display Frame; Table 6.5 Messages In The Setting Progress Display Window; Table 6.6 Messages In The [Customer Information] Window; Table 6.7 Messages In The Initial Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0005
RMG_0006
RMG_0035
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0006
RMG_0065
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0035
Message code
RMG_0002
RMG_0004
RMG_0010
RMG_0018
Message code
RMG_0002
RMG_0004
RMG_0008
Frame data make completed.
Failed to get connect mode. (xxx)
REMCS menu close. Are you sure?

TABLE 6.4 Messages in the state display frame

Message
Failed to get Machine status. (xxx)
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Failed to get customer information.(xxx)

TABLE 6.5 Messages in the setting progress display window

Message
Failed to get Machine status. (xxx)
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified.
REMCS menu close. Are you sure?

TABLE 6.6 Messages in the [Customer Information] window

Message
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified.
Customer Information Registration frame
display completed.
Failed to get registration data..(xxx)

TABLE 6.7 Messages in the initial window

Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Initial frame display completed.
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you
retry the operation, exit and
restart the REMCS window
and
try again. If the problem is
not
solved, contact the support
center.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
53
Action
Action
Action
Action
CA92344-0542-02