Configure Bgp Peer-Group Send-Community - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands—"i" Series Switches Only

configure bgp peer-group send-community

configure bgp peer-group <peer group> [send-community |
dont-send-community]
Description
Configures whether communities should be sent to neighbors as part of route updates.
Syntax Description
peer group
send-community
dont-send-community
Default
N/A.
Usage Guidelines
These settings apply to the peer group and all neighbors of the peer group.
Example
The following command configures communities to be sent to neighbors as part of route updates:
configure bgp peer-group outer send-community
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on "i" series of switches.
1958
Specifies a peer group.
Specifies that communities are sent to neighbors as part of route updates.
Specifies that communities are not sent to neighbors as part of route updates.
ExtremeWare 7.7 Command Reference Guide