Configure Ipxsap Vlan Import-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure ipxsap vlan import-filter

configure ipxsap vlan [<vlan name> | all] import-filter [none |
access_profile]
Description
Assigns an import route filter to an ingress VLAN.
Syntax Description
vlan name
all
none
access_profile
Default
N/A
Usage Guidelines
Only the network ID matching the import filter will be added to the IPX route table.
Example
The following command assigns an import route filter to the ingress VLAN named accounting:
configure ipxsap vlan accounting import-filter none
History
This command was introduced in ExtremeWare 4.0; the
version 6.1.5b20.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
Specifies no route filters.
Specifies an access profile name.
keyword was modified in
access-profile
configure ipxsap vlan import-filter
2113