Configure Mvr - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure mvr

configure mvr [add|delete] vlan <vlan-name>
Description
Configures MVR on the specified VLAN.
Syntax Description
vlan name Specifies a VLAN name on which the MVR has to configured.
Default
None
Usage Guidelines
You can configure and enable MVR only on a single VLAN.
Example
The following command configures the VLAN accounting as an MVR VLAN:
configure mvr add vlan accounting
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on "e" series platforms only.
2046 ExtremeWare 7.7 Command Reference Guide