Extreme Networks ExtremeWare Command Reference Manual page 2243

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure diffserv ingress replacement ports

The following command configures the low-priority to 5 and the high-priority to 10 on all ports for all

ingress QoS profiles:

configure diffserv ingress replacement low-priority code-point 5 high-priority

code-point 10 ports all

This command was first available in ExtremeWare 7.1.

Platform Availability

This command is available on

series I/O modules only.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7