Show Multilink - Extreme Networks ExtremeWare Command Reference Manual

T1, E1, and T3 WAN Commands—Alpine 3800 Series Platforms

show multilink

show multilink <groupname>
Description
Displays the configuration of the multilink group.
Syntax Description
groupname Specifies a previously created multilink group.
Default
N/A
Usage Guidelines
Use this command to display the ports in a multilink group, and the PPP configuration of the group.
Example
The following command displays the configuration for the multilink group m_remote1:
show multilink m_remote1
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
2222 ExtremeWare 7.7 Command Reference Guide