Extreme Networks ExtremeWare Command Reference Manual page 2025

Hide thumbs Also See for ExtremeWare:

Table of Contents

configure igmp snooping flood-list

Given access profile access1 created as follows:

create access-profile access1 type ipaddress

configure access-profile access1 add ipaddress 224.1.0.1/32

The following command configures the multicast data stream specified in access1 for slow path flooding:

configure igmp snooping flood-list access1

The following command specifies that no access profile is to be used, this effectively disabling slow

path flooding:

configure igmp snooping flood-list none

This command was first available in ExtremeWare 6.2.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7