Enable Mvr - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

enable mvr

enable mvr
Description
Enables MVR on the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
You can enable MVR only on a single VLAN. MVR can be enabled only after MVR vlan is added using
the .
command configure mvr add vlan <vlan-name>
Example
The following commands enables an MVR on the VLAN accounting:
configure mvr add vlan accounting
enable mvr
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on "e" series platforms only.
2072 ExtremeWare 7.7 Command Reference Guide