Disable Flow-Control Ports - Extreme Networks ExtremeWare Command Reference Manual

High-Density Gigabit Ethernet Commands—Alpine 3800 and BlackDiamond 6800 Series Only

disable flow-control ports

disable flow-control ports [<portlist> | all]
Description
Disables 802.3x flow control on
Syntax Description
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
"3"
all Specifies all series ports.
Default
Disabled
Usage Guidelines
If you disable flow control, use the following keywords:
• to specify an individual
portlist
"3"
• to specify all series ports
all
If you disable flow control on a
auto-negotiation. Flow control is auto-negotiated and is disabled if both ports do not support it.
Example
The following command disables flow control on slot 2, ports 1 through 4:
disable flow-control ports 2:1-2:4
History
This command was first available in ExtremeWare 7.0.1.
Platform Availability
This command is available on
2256
"3"
series ports.
"3" series port or a group of
"3" series port, the port does not advertise flow control support during
"3"
series I/O modules only.
"3" series ports
ExtremeWare 7.7 Command Reference Guide