Unconfigure Rip - Extreme Networks ExtremeWare Command Reference Manual

unconfigure rip

unconfigure rip
unconfigure rip {vlan <vlan name>}
Description
Resets all RIP parameters to the default VLAN.
Syntax Description
vlan name Specifies a VLAN name.
Default
All.
Usage Guidelines
Does not change the enable/disable state of the RIP settings.
Example
The following command deletes RIP configuration from the VLAN finance:
unconfigure rip finance
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1913