Show Diagnostics Cable - Extreme Networks ExtremeWare Command Reference Manual

show diagnostics cable

show diagnostics cable {ports {<portlist> | all}} {mode {auto | manual |
both} {detail}
Description
Displays cable diagnostics information currently stored in the Cable Diagnostics Module (CDM) data
structures.
Syntax Description
portlist
all
mode auto
mode manual
mode both
detail
Default
• ports—all: If the optional
• mode—both: If the optional
and the last automatic run are displayed.
• detail—detail: If the optional
Usage Guidelines
Use this command to display or print the following cable diagnostics data for each selected port:
• Time and date of test
• Cable length (meters)
• Pair status
• Pair skew
• Pair swap
• Fault length (meters)
• Polarity
• Speed (Mbps)
You can configure the CDM to obtain diagnostics information automatically through the
diagnostics cable
run diagnostics cable
cable diagnostics data captured from either the latest CDM manual run or automatic run; or you can
view data captured from both the manual and automatic runs.
ExtremeWare 7.7 Command Reference Guide
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
Specifies all "3" series ports. The default value is all.
Specifies that cable diagnostics data collected automatically should be displayed. The default is
"both."
Specifies that cable diagnostics data collected manually should be displayed. The default is
"both."
Specifies that cable diagnostics data collected automatically and manually should be displayed.
The default is "both."
Specifies that cable diagnostics data should be displayed in detail format. The default format is
summary.
keyword is not used, the show listing includes all ports.
ports
keyword is not used, data collected from both the last manual run
mode
detail
command; or you can manually obtain cable diagnostics at any time by issuing the
command. You can use the
keyword is not used, a summary listing is generated.
show diagnostics cable
show diagnostics cable
configure
command to view
2265