Configure Ipxsap Vlan Max-Packet-Size - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands—"i" Series Platforms Only

configure ipxsap vlan max-packet-size

configure ipxsap vlan [<vlan name> | all] max-packet-size <number>
Description
Configures the MTU size of the IPX/SAP packets.
Syntax Description
vlan name
all
max-packet-size <number> Specifies the maximum packet size in bytes.
Default
The default setting is 432 bytes.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command configures an MTU size of 356 bytes for the IPX/SAP packets on the VLAN
named accounting:
configure ipxsap vlan accounting max-packet-size 356
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2114
Specifies a VLAN name.
Specifies all VLANs.
ExtremeWare 7.7 Command Reference Guide